From December 18th to 19th, 2025, the GAF Chongqing New Energy Three-Electric System Shell Structure Design Innovation and Intelligent Manufacturing Technology Summit will be held in Chongqing. As an innovative representative in the domestic intelligent equipment field, Chongqing Chuke Intelligent Machinery Equipment Co., Ltd. (hereinafter referred to as "Chuke Intelligent") has been invited to participate in the exhibition, showcasing multiple core equipment and intelligent solutions. It will explore technological changes with leading companies in the global new energy industry chain, contributing to the lightweighting, high precision, cost reduction, and efficiency improvement of three-electric system shell manufacturing. This summit focuses on two core directions in the design of new energy three-electric system shells: "lightweight structure optimization" and "manufacturing process innovation." Leveraging its years of experience in precision machining and automation, Chuke Intelligent has launched high-precision laser processing equipment, integrated die-casting solutions, and intelligent testing systems to address industry pain points. These can be widely applied to the cutting, marking, welding, and quality inspection of lightweight materials such as aluminum alloys and magnesium alloys. Among them, Chuke Intelligent's independently developed high-speed fiber laser marking machine, with its micron-level precision and high efficiency and

There are generally three ways to carve glass on Automatic Laser Cleaner: Automatic Laser Cleaner can carve some text, patterns, symbols, LOGO trademarks, QR codes, production dates, etc. on materials such as glass crystal. Automatic Laser Cleaner have the effect of marking LOGO that never fades and never falls off, and has excellent corrosion resistance and wear resistance. The machine itself does not require any consumables. No ink is required for engraving, and it can be produced by just turning on the power; and the engraving speed is fast and the operation is simple. It only takes 1-5 seconds to complete the marking of a LOGO trademark. Because the Automatic Laser Cleaner has a very small focused spot and a small processing heat-affected zone, UV lasers can be used for ultra-fine marking and special material marking. It is the first choice for customers who have high requirements for identification effects. In addition to copper materials, UV lasers are also suitable for materials with a wider processing range. Not only does it have good beam quality, but it also has a small focus, which can achieve ultra-fine marking. It has a wider range of applications. The heat-affected zone is extremely small, there is no thermal effect, and there is no problem of material burning. The marking speed is fast and the efficiency is high. The whole machine has stable performance, small size, and low power consumption.

In the injection molding industry, mold cleanliness directly affects product quality and production efficiency. However, traditional mold cleaning methods face numerous challenges. Chemical cleaning agents may corrode the mold material, while mechanical cleaning can easily cause scratches on the mold surface, affecting its lifespan and precision. Furthermore, traditional cleaning methods generate large amounts of wastewater and waste, polluting the environment. Therefore, finding an efficient, environmentally friendly, and non-destructive cleaning method has become a pressing issue for the injection molding industry. Laser Cleaning Machine utilize advanced laser technology, employing high-energy laser beams to achieve non-destructive cleaning of injection molds. This cleaning method not only thoroughly removes dirt from the mold surface but also protects the mold's surface quality and extends its lifespan.

Welding technology is an indispensable and crucial link in modern industrial manufacturing. Whether in automobile manufacturing, aerospace, or machining, welding quality directly affects product performance and safety. However, surface treatment before welding and cleaning after welding have always been important factors affecting welding quality. Traditional methods often fall short of ideal results, but the emergence of Laser Cleaning Machine has brought about a breakthrough innovation in welding processes. During the welding process, the cleanliness of the material surface has a crucial impact on weld quality. Before welding, the material surface often retains impurities such as oil, rust, and oxide layers. If these impurities are not thoroughly removed, they will cause defects such as porosity and inclusions during welding, seriously affecting the quality and strength of the weld joint. After welding, spatter, oxide scale, etc., may remain on the weld surface, not only affecting appearance but also potentially leading to corrosion and other problems. Traditional cleaning methods, such as manual grinding and chemical cleaning, although widely used, suffer from low efficiency, environmental pollution, and damage to the substrate. Therefore, the welding industry urgently needs an efficient, environmentally friendly, and precise cleaning technology to improve welding quality.

Traditional Laser Cleaning Machine are bulky, slow in construction efficiency, and poor in effect. Therefore, the emergence of Laser Cleaning Machine is gradually replacing traditional welding equipment. It is exquisite and compact, with a compact and more reasonable internal structure. It can be moved by one person, easy to operate, with better effect, and lower welding cost. It is more in line with modern work needs, and has less harm to the human body than traditional welding methods. The efficiency of Laser Cleaning Machine is about 3-5 times that of traditional electric welding. The gas welding gun feels more ergonomic. It takes only a few minutes to learn and train to weld well. Professional welders are not needed. Refined management reduces the company's labor costs and improves productivity. The product has a service life of up to 100,000 hours and is very convenient to carry. Laser Cleaning Machine are a substitute for the argon arc welding machine and arc welding that we used to use. 1. Welding effect: Laser Cleaning Machine are not prone to blackening, deformation, or welding penetration. Because the power can be controlled by computer programs, Shandong Haohan can provide 500w-3000w power welding machines to achieve the welding thickness of various materials. 2. Productivity: The advantages of Laser Cleaning Machine over traditional welding methods are faster, more efficient, and lower product costs; easy to use, no professional welders are required, operators can also operate, reducing labor costs; welding is smooth and beautiful, no need for too much polishing, saving consumables, 3. New Water Cooling Handheld CW Laser

The centrifugal fan is the main equipment of Laser Cleaning Machine. When the equipment is running for a long time, a lot of debris and dust will accumulate in the centrifugal fan. If the customer finds that the centrifugal fan makes noise when using the automatic cutting machine, it is necessary to clean and maintain it in time. After cleaning the centrifugal fan, the exhaust system of the centrifugal fan can be smoother and the noise problem can be avoided. There are also many lenses on Air Cooling Handheld CW Laser Cleaner. Workers should clean these lenses regularly, but they should use professional tools to operate during the cleaning process. To avoid scratching the lenses, follow the operating specifications when disassembling and installing the optical lenses. These are all maintenance knowledge that everyone needs to master. Finally, Air Cooling Handheld CW Laser Cleaner also need to choose a good manufacturer when purchasing, so as to ensure the quality, life and after-sales of the equipment.

Laser Cleaning Machine have been widely used in the aluminum alloy welding production lines of many well-known companies and have received high praise from customers. At a certain automobile manufacturing company, Laser Cleaning Machine are used for the pre-welding treatment of automotive aluminum alloy parts. Traditional cleaning methods require a significant amount of time and manpower, and the cleaning results are inconsistent. Since the introduction of Laser Cleaning Machine, cleaning efficiency has increased several times, welding quality has significantly improved, and the first-pass yield of products has increased substantially. The customer stated that Laser Cleaning Machine not only improve production efficiency but also reduce production costs, while contributing to the company's environmental goals. In the aerospace field, laser cleaning technology has also demonstrated superior performance. For some complex-shaped aluminum alloy parts with extremely high precision requirements, Laser Cleaning Machine can accurately remove oxide films, ensuring that welding quality meets stringent industry standards. In the field of aluminum alloy welding oxide film cleaning, we will continue to deepen research and development to further improve the performance and efficiency of Laser Cleaning Machine and expand their application scope. At the same time, we will strengthen cooperation with domestic and foreign research institutions and enterprises to jointly explore the application of laser cleaning technology in more fields, contributing to the green and efficient development of industrial manufacturing.

The difficulty of Laser Cleaning Machine thick steel plate is much higher than that of metal sheet, and the appearance of the cross section is more obvious than that of the Air Cooling Backpack Pulsed Laser Cleaner texture of metal sheet. Therefore, the Laser Cleaning Machine cross section often encountered in the production and processing of hot-rolled strip steel, the quality of the finished product of the Air Cooling Backpack Pulsed Laser Cleaner is not only questioned. It will also continue to be accompanied by coarse grains and obvious sticky slag, so that the processing value of the Laser Cleaning Machine cannot be fully reflected. In the production and processing of the entire PCB circuit board of the metal sheet, sometimes the production and processing abnormalities of some areas will occur randomly. This will happen even when the processing machine is in good condition. Solving some processing problems will also affect the progress of the entire processing.

Removing electrophoretic coating layers has long been a technical challenge in modern industrial production. Traditional cleaning methods are not only inefficient but also cause significant damage to the substrate, failing to meet the demands of high-precision, high-efficiency production. However, with the continuous development of Laser Cleaning Machine technology, this problem has finally seen a breakthrough solution. Laser Cleaning Machine offer a non-contact cleaning method, which has many significant advantages compared to traditional methods. First, Laser Cleaning Machine are an environmentally friendly cleaning method. They do not require chemical reagents and do not generate wastewater, waste materials, or other pollutants, thus causing no pollution to the environment. Second, Laser Cleaning Machine offer extremely high precision, achieving precise and accurate cleaning results. For materials like electrophoretic coating layers, which require extremely high precision, Laser Cleaning Machine can easily achieve precise and controllable removal. Furthermore, Laser Cleaning Machine are very fast, enabling large-area cleaning work to be completed in a short time, greatly improving production efficiency.

Assemble the rear panel of the optical table and the red indicator light of the semiconductor material. Since the laser is invisible to the human eye, the red laser is used as a reference for the loop. The red light must be consistent with the laser direction, so it is required that the loop of the red light is parallel to the optical table and the height is consistent with the core height of the YAG rod. Fix the front partition of the Water Cooling Handheld CW Laser Cleaner: assemble the front partition and adjust it so that the red light is emitted just past the right center of the partition light outlet hole. In order to achieve better results in the use of Laser Cleaning Machine, there are many things to pay attention to during installation, and it is necessary to choose a good manufacturer to buy. The Water Cooling Handheld CW Laser Cleaner you buy is guaranteed, and it will also provide professional installation methods and perfect after-sales service in the future.

Amidst a global emphasis on energy conservation and emission reduction, Laser Cleaning Machine stand out due to their low power consumption. Compared to traditional cleaning equipment, this device consumes only a small amount of electricity during operation, yet achieves cleaning results that can even surpass those of traditional equipment. This means that businesses using Laser Cleaning Machine can significantly reduce energy costs without compromising production efficiency. In the long run, this not only helps businesses improve economic efficiency but also aligns with the concept of sustainable development, providing strong support for businesses' green production transformation. The low power consumption operation mode makes Laser Cleaning Machine an ideal choice for businesses pursuing both high-efficiency production and energy conservation and emission reduction. Despite their small size and low power consumption, Laser Cleaning Machine are just as effective at cleaning. Utilizing advanced laser technology, they can precisely remove various stains, rust, coatings, etc., from the surface of small parts without damaging the parts themselves. Whether it's metal parts, plastic parts, or small parts made of other materials, they can be restored to their original clean state in a short time. This high-yield cleaning quality not only ensures product quality stability but also reduces the defect rate caused by incomplete cleaning, saving companies significant costs. Furthermore, laser cleaning does not use chemical reagents, avoiding the environmental pollution problems that may arise from traditional cleani

1. Fix the material to be cut on the Laser Cleaning Machine workbench. 2. According to the material and thickness of the metal sheet, adjust the parameters of the Automatic Laser Cleaner accordingly. 3. Select appropriate glasses and nozzles, and conduct pre-start inspection to check their integrity and cleaning status. 4. According to the thickness and cutting requirements of the Automatic Laser Cleaner, adjust the cutting head to the appropriate focus position. 5. Select the appropriate Automatic Laser Cleaner cutting gas and check whether its gas spraying condition is good. 6. Try to cut the material. After the material is cut, check the vertical angle of the cross section, the surface roughness and whether there are burrs and slag. 7. Analyze the cross-section situation and adjust the cutting parameters accordingly until the cross-section process of the sample meets the requirements. 8. Program the workpiece construction drawings and the design layout of the entire PCB circuit board cutting, and import them into the Automatic Laser Cleaner cutting system. 9. Adjust the cutting head and focus distance, prepare the auxiliary gas in advance, and cut slowly. 10. Check the production process of the sample. If there is any abnormality, adjust the basic parameters immediately until the cutting meets the production process requirements.

With the development of science and technology, the manufacturing industry has been continuously explored, and the characteristics of welding structures have been continuously improved. Laser welding has a particularly important effect on the welding of some materials and structures. This type of welding method has been widely used in aerospace engineering, electronic devices, automobile manufacturing, nuclear batteries and other innovative technology fields. Laser welding equipment has gradually been widely used with its energy density, deep penetration, zero pollution, high precision, strong adaptability, high efficiency and fast welding. Laser welding equipment is a welding method that uses energy-density laser pulses to locally heat the material in a small area. The laser radiation energy spreads to the structure of the raw material according to heat conduction, and the material is melted to form a specific molten pool to achieve the purpose of welding. First, the automation technology is high. In this case, the Compact Air Cooling Handheld Pulsed Laser Cleaner can be manually programmed when welding. Second, there are processing companies that require welding. For welding products, it usually uses Laser Cleaning Machine for welding. Not only is the welding small, but it also does not require consumables. Third, there are some small and inaccessible parts that require Laser Cleaning Machine. It can weld parts that are difficult to access by traditional processing methods, and perform non-contact long-distance welding. For example, in recent years, the fiber technology used in YAG laser processing technology has made laser welding more widely used

In modern industrial production, removing electrophoretic paint layers has always been a technical challenge. Traditional cleaning methods are not only inefficient. but also cause significant damage to the substrate, making it difficult to meet the demands of high-precision, high-efficiency production. However, with the continuous development of Laser Cleaning Machine technology, this problem has finally seen a breakthrough solution. Laser Cleaning Machine offer a non-contact cleaning method, which has many significant advantages compared to traditional methods. First, Laser Cleaning Machine are an environmentally friendly cleaning method. They do not require chemical reagents and do not generate wastewater, waste materials, or other pollutants, thus causing no pollution to the environment. Second, Laser Cleaning Machine offer extremely high precision, achieving precise and accurate cleaning results. For materials like electrophoretic paint layers, which require extremely high precision, Laser Cleaning Machine can easily achieve precise and controllable removal. Furthermore, Laser Cleaning Machine are very fast, enabling them to complete large-area cleaning work in a short time, greatly improving production efficiency.

1. High energy conversion level: The optical conversion efficiency of Laser Cleaning Machine is up to 30%, and the energy consumption is lower. 2. Convenient and flexible: Laser Cleaning Machine are easy and flexible, and can complete outdoor welding. 3. Welding does not require polishing: Continuous welding method, welding is beautiful and scar-free, and there are fewer subsequent polishing processes. 4. Wide application coverage: Applicable materials, the application scope covers almost most industrial fields. Widely used in kitchen cabinets, cabinets, staircase elevators, storage shelves, barbecue boxes, stainless steel anti-theft door guardrails, distribution cabinets, stainless steel furniture, field advertising, lighting and sheet metal chassis and other fields of complex and irregular welding processes. No one is perfect. Although Air Cooling Backpack Pulsed Laser Cleaner have many advantages, they also have certain defects. For example, people will feel sore in their arms after long-term handheld operation, and try to wear goggles during operation to avoid flying sparks during welding.

Laser Cleaning Machine are a type of vehicle that uses high-energy-density lasers to directly irradiate workpieces. Chemical changes occur during this process, leaving marks. This is the effect of Laser Cleaning Machine. So what can Laser Cleaning Machine print? Laser Cleaning Machine can print text and patterns, and can even engrave, and can be accurate to a few millimeters or even microns. At present, many companies are using excimer Laser Cleaning Machine, which is a technology developed this year and is suitable for application on various materials, especially metal materials. 1. It can print patterns, texts, barcodes, etc. 2. The applicable materials are very wide, suitable for metal, glass, porcelain, wood, plastic and other materials. 3. The scale of the mark is controllable, and the parts will not cause harm. 4. It is more environmentally friendly and does not require any paint to mark the workpiece. 5. Simple operation and easy to get started. The utilization efficiency of Compact Air Cooling Handheld Pulsed Laser Cleaner is very high, and the cost of use is also very low. It can be marked on a wide range of materials. At present, Laser Cleaning Machine are increasingly used, especially in various mechanical industries and instruments, auto parts and even vehicle windows, wires, circuit boards, electronic devices, integrated circuit modules, connectors, tools, rubber and plastic products, computer keyboards, glass products, etc. All of them can be applied to Compact Air Cooling Handheld Pulsed Laser Cleaner.

Laser Cleaning Machine have been widely used in the aluminum alloy welding production lines of many well-known companies and have received high praise from customers. At a certain automobile manufacturing company, Handheld Cleaner are used for the pre-welding treatment of automotive aluminum alloy parts. Traditional cleaning methods require a significant amount of time and manpower, and the cleaning results are inconsistent. Since the introduction of Handheld Cleaner, cleaning efficiency has increased several times, welding quality has significantly improved, and the first-pass yield of products has increased substantially. The customer stated that Laser Cleaning Machine not only improve production efficiency but also reduce production costs, while contributing to the company's environmental goals. In the aerospace field, laser cleaning technology has also demonstrated superior performance. For some aluminum alloy parts with complex shapes and extremely high precision requirements, Laser Cleaning Machine can precisely remove oxide films, ensuring that welding quality meets stringent industry standards.

Currently, efficiency in the manufacturing and processing industry is constantly improving, and there are also higher requirements and standards for the use of various equipment. This is to meet the actual needs of product processing. For current marking machines, thanks to continuous technological advancements, the use and development of laser products are gradually being promoted, including in Laser Welding Machine. But how should users understand the details when choosing to use Laser Welding Machine? Handheld Laser Welding Machine manufacturers believe that current Laser Welding Machine mainly utilize laser beams, adjusting their focal length. They use lasers to thermally melt the surface of objects, thus engraving pre-set patterns and numbers. During the development and design of Laser Welding Machine, their functions are continuously improved, enabling multiple applications and marking on various products. This allows for selection and use in various production fields, including packaging, building ceramics, electronic components, and clothing. As can be seen from the above, current Laser Welding Machine can be used in various products, including the processing of product components in the mechanical field. It can be used to engrave and mark nameplates on mechanical parts to effectively indicate important information and content about the machinery and components. This plays a very important role in the production and sales of mechanical parts, as can be seen in the significant role that Laser Welding Machine play in practical applications today.

Nameplates are used for various functions in the manufacturing and distribution of many products, including marking, identification, and related warnings. However, the production and processing of nameplates requires different equipment. Currently marketed Laser Welding Machine can meet actual production requirements, but what specific application requirements can Laser Welding Machine meet in practice? In many manufacturing industries, whether for industrial equipment or mechanical parts, specialized nameplates are used. Nameplates, in their specific applications, effectively indicate key information and content about mechanical parts. They are crucial throughout the entire application process. To meet the application requirements of nameplates, today's laser engraving machines can effectively address specific application challenges. Furthermore, today's laser engraving machines can be applied to many different packaging designs, demonstrating their widespread application in various manufacturing industries. To better meet the demands of the application market, professional Handheld Laser Welding Machine manufacturers are continuously designing, developing, and producing products. Through practical testing and user experience, they can better understand the performance of Laser Welding Machine. Through continuous improvement and design of existing problems, the types of Laser Welding Machine are constantly expanding, and they can better play a role in actual application and meet actual application needs.

The application scope of laser technology is becoming more and more extensive, among which Pneumatic Dot Peen Marking Machine play a vital role in industrial production. Pneumatic Dot Peen Marking Machine have become the first choice of many companies with their high efficiency and accuracy. This article will introduce you to the technical characteristics and application fields of Pneumatic Dot Peen Marking Machine to help you understand this advanced equipment. 1. High precision: Pneumatic Dot Peen Marking Machine use laser beams for marking, and the laser beams can be precisely controlled to achieve high-precision marking effects. 2. High efficiency: Dot Peen And Scribe Marking have a fast marking speed and can complete a large number of marking tasks in a short time, improving production efficiency. 3. Non-contact marking: Dot Peen And Scribe Marking use non-contact marking to avoid wear and damage on the surface of objects.

Pneumatic Dot Peen Marking Machine are also highly adaptable when processing different materials. Whether it is metal, plastic, ceramic or glass, the device can easily achieve high-quality marking effects. This makes Dot Peen And Scribe Marking widely used in various industries, such as electronics, medical, automobiles, jewelry, etc. In addition, Pneumatic Dot Peen Marking Machine also support a variety of marking methods, such as QR codes, barcodes, text, patterns, etc. You can choose according to actual needs, and you can customize the settings as needed. This provides companies with more flexibility to meet the personalized requirements of different industries and products. In summary, Dot Peen And Scribe Marking have become an indispensable process equipment in modern manufacturing with their high precision, laser technology and multi-material adaptability. If you want to improve product quality, production efficiency and market competitiveness, you might as well consider introducing Pneumatic Dot Peen Marking Machine.

1. Customized selection: Choose the appropriate equipment type and power according to the different needs of the enterprise. If complex pattern marking or fine processing is required, it is recommended to choose high-power equipment to ensure the clarity and accuracy of Dot Peen And Scribe Marking marking. 2. Merchant reputation: Choose a manufacturer or agent with good reputation to buy Pneumatic Dot Peen Marking Machine, you can get better after-sales service and quality assurance. 3. Equipment configuration: Choose the configuration of Pneumatic Dot Peen Marking Machine according to actual needs, such as automatic loading and unloading system, networking function, etc. These configurations can improve work efficiency and marking quality. 4. Trial experience: Before purchasing an Dot Peen And Scribe Marking, you can ask the supplier to provide a trial opportunity for the equipment to better understand the performance and applicability of the equipment. 5. Quality assurance: When purchasing an Dot Peen And Scribe Marking, you must understand the relevant quality assurance and after-sales service terms to ensure that the equipment can operate stably for a long time. 6. Cost-effectiveness: When choosing an Dot Peen And Scribe Marking, you must comprehensively consider factors such as equipment performance, price and use cost to achieve the best cost-effectiveness. In summary, Pneumatic Dot Peen Marking Machine are an important tool to improve production efficiency and product quality. By understanding equipment prices and purchasing recommendations, you can choose the right equipment more wisely and improve your company'

Whether Laser Welding Machine manufacturers choose water cooling or air cooling for factory cooling depends primarily on the power of the equipment itself. Both types of cooling function identically: providing cooling to ensure the normal operation of the Laser Welding Machine. For example, semiconductor Laser Welding Machine have relatively high power outputs and are typically cooled with water. Water cooling provides a greater cooling capacity, but the disadvantage of water cooling is its relatively large volume. In practice, both water and air cooling are generally used to cool the Laser Welding Machine's transmitter and Q drive. Generally, high-power laser equipment generates considerable heat from its laser generator, so circulating water cooling is used. On the other hand, optical fiber and low-power CO2 devices have relatively low power outputs (basically under 50W), so the heat generated by the laser generator is not significant. Air cooling is sufficient, thus reducing both the equipment's volume and power.

To put it simply, Accessories And Consumables allow users to add desired information to products, including company names, product names, product information (serial numbers, serial numbers), production dates, and anti-counterfeiting codes. As a result, the widespread use of Laser Source is unmatched by many other devices. Accessories And Consumables have long been widely used in both industrial production and our daily lives. Currently, Laser Source are primarily used in applications requiring more stringent requirements and high precision. They are not only suitable for marking on cardboard boxes, but are also widely used in the arts and crafts, wood, clothing, birthday cards, electronic components, plastics, physical models, pharmaceutical packaging, ceramics, and textile cutting industries. Examples include laser marking on leather, printing on wooden packaging boxes, chopsticks, and marking on pharmaceutical packaging.