3. Do not allow the power cord of an Compact Air Cooling Handheld Pulsed
Laser Cleaner to be close to a heater.
4. Before disconnecting the power cord and other cables of an Compact Air Cooling Handheld Pulsed Laser Cleaner, be sure to turn off the power.
5. Do not place Laser
Cleaning Machine at high temperatures, especially in areas where
Laser Cleaning Machine are exposed to direct sunlight or near heaters.
6. When transporting and maintaining Compact Air Cooling Handheld Pulsed Laser Cleaner equipment, disconnect the power plug from the socket. Prevent electric shock.
7. When disconnecting the power cord, do not hold the cable tightly, but hold the plug tightly.
8. When an Compact Air Cooling Handheld Pulsed Laser Cleaner is not in use for a long time, please disconnect the power plug to prevent fire.
9. Do not disconnect the power plug with wet hands to avoid human electric shock.
10. Do not place any objects on the Compact Air Cooling Handheld Pulsed Laser Cleaner equipment.
11. Please turn off the power when cleaning the
Lens.
12. Do not move the terminal with any objects placed in the device.
13. Do not close the vents to block the heat dissipation of the machine.
14. Do not modify, heat, apply excessive force to bend, twist or stretch the optical fiber Compact Air Cooling Handheld Pulsed Laser Cleaner, or place heavy objects on the optical fiber line, which may cause damage to the optical fiber line. The minimum bending radius of the optical fiber cable is 150mm or larger. Bending, squeezing, stretching and heating of the optical fiber cable will not only cause failures, but also fail to maintain the instrument performance.
15. In daily use, according to the waste gas generated by the laser processing product materials, consider installing exhaust and air purifiers. Some materials may produce harmful smoke or particles, and the dust in the equipment may cause failures or fires.
16. Please turn off the power when cleaning the lens, otherwise it may cause harm to the human body. Please do not put your hands in the laser marking area.
